A bar faucet is a smaller cousin of the kitchen faucet. It is made for the shallow sink in a wet bar or prep area, where a tall arc would crowd the cabinet above and a long spout would miss a small bowl. Most use one hole, though some use a centerset with two handles.
The six faucets below range from a compact single-handle model to a two-handle brass centerset and three pull-down sprayers. Sizes, hole counts and flow rates come from each product’s listing page. We have not used these faucets ourselves. Material and finish claims are the makers’ own.
As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.
What to Look For
| Feature | Why it matters |
|---|---|
| Hole count | One hole or a three-hole centerset must match your sink |
| Spout height | Check clearance under cabinets and over the bowl |
| Sprayer | A pull-down head helps rinse a small sink |
| Flow rate | Listed in gallons per minute |
| Finish | Brushed and matte finishes hide water marks differently |
Specs at a Glance
| Faucet | Holes and handles | Size | Notes |
|---|---|---|---|
| Delta Modern | 1 hole; 1 lever | 8.38 x 3.75 x 11.5 in | 360 degree swivel; limited lifetime warranty |
| Delta Essa | 1 hole; 1 lever | 14 in spout height; 6.63 in reach | Pull-down sprayer; 1.8 gpm |
| Kingston Brass KB498 | Centerset; 2 levers | 11.56 in spout height; 4.75 in reach | Brass; 180 degree swivel; 1.8 gpm |
| Cenosa | 1 hole; 1 handle | Pull-down hose of 13.8 in | 304 stainless steel; 1.6 gpm |
| KRAUS Oletto | 1 hole; 1 lever | 12 in tall; 6.5 in reach | Brass; 1.8 gpm; 360 degree swivel |
| FORIOUS | 1 hole; 1 lever | 9.84 in tall; 7.87 in spout height | Pull-down sprayer with 15.74 in hose; 1.8 gpm |
The 6 Best Bar Faucets for Wet Bars
1. Delta Modern Single Hole Bar Faucet
A single-lever faucet with a high arc, a metal body and a 360 degree swivel spout, measuring 8.38 by 3.75 by 11.5 inches. It fits one hole, or a three-hole 4 inch sink with a deck plate that is sold separately. The maker backs it with a limited lifetime warranty.
Suits: a simple prep sink. Strengths: a name brand with a warranty. Weaknesses: no sprayer, and we could not read a flow rate on the page. Skip it if you want a pull-down head.
View Delta Modern Brushed Nickel Single Hole Bar Sink Faucet on Amazon
2. Delta Essa Bar Faucet With Pull Down Sprayer
A single-hole faucet with a pull-down sprayer, a 14 inch spout height, a 6.63 inch reach, an 8.7 inch hose and a flow rate of 1.8 gallons per minute. It fits one hole or an 8 inch three-hole sink with an optional deck plate.
Suits: a bar sink that needs rinsing. Strengths: a sprayer and a brand warranty. Weaknesses: the tallest here, so check cabinet clearance. Skip it if you have a low shelf above the sink.
View Delta Essa Brushed Nickel Bar Sink Faucet with Pull Down Sprayer on Amazon
3. Kingston Brass KB498 Magellan Bar Faucet
A traditional brass faucet with two lever handles, a high-arc spout 11.56 inches tall with a 4.75 inch reach, a 180 degree swivel and a 1.8 gallon per minute flow rate. The page lists three holes, while a bullet describes a 4 inch two-hole centerset, so confirm the layout before ordering.
Suits: a classic look over a double-basin bar sink. Strengths: brass construction and a compact reach. Weaknesses: conflicting hole details, and two handles to operate. Skip it if you want one lever.
View Kingston Brass KB498 Magellan Bar Faucet Brushed Nickel on Amazon
4. Cenosa Bar Sink Faucet With Pull Down Sprayer
A single-hole, single-handle stainless steel faucet with a 13.8 inch pull-down hose, two spray modes, a 360 degree swivel spout and a flow rate of 1.6 gallons per minute. The maker says installation hardware is included, except the deck plate.
Suits: a sprayer without a big brand name. Strengths: two spray modes and a lower flow rate. Weaknesses: a lesser-known brand. Skip it if you want a major-brand warranty.
View Cenosa Bar Sink Faucet Single Hole with Pull Down Sprayer on Amazon
5. KRAUS Oletto Single Handle Bar Faucet
A solid brass faucet 12 inches tall with a 6.5 inch reach, a high-arc spout that swivels 360 degrees, a flat lever handle that turns 90 degrees forward and pre-attached water lines. The flow rate is 1.8 gallons per minute and the maker offers a limited lifetime warranty.
Suits: a polished bar or prep area. Strengths: brass and attached lines. Weaknesses: no sprayer, and the page lists Kitchen as its use. Skip it if you want a pull-down head.
View KRAUS Oletto Single Handle Bar Faucet Brushed Brass on Amazon
6. FORIOUS Bar Sink Faucet With Pull Down Sprayer
A compact L-shaped faucet 9.84 inches tall with a 7.87 inch spout height, a 15.74 inch pull-out hose, a spray and stream switch, a deck plate and a 1.8 gallon per minute flow rate in matte black stainless steel.
Suits: a low profile under a shelf. Strengths: the lowest height with a sprayer. Weaknesses: a newer brand. Skip it if you want a high arc for tall pitchers.
View FORIOUS Black Bar Sink Faucet with Pull Down Sprayer on Amazon
Care and Setup
- Measure the sink holes and the space above before ordering.
- Use a soft cloth on brushed and matte finishes.
- Turn off the supply before changing a faucet.
- Clean the aerator now and then.
Mistakes to Avoid
- Ignoring the hole count of the sink.
- Choosing a tall arc under a low shelf.
- Using harsh cleaners on a finish.
- Skipping the deck plate when a sink has extra holes.
Bar Faucet FAQ
What is the difference from a kitchen faucet?
Bar faucets are shorter and smaller to suit a prep sink. Compare the heights in the table.
Do they need a deck plate?
Only when the sink has extra holes. Delta lists its plates as sold separately.
The Short Version
For a simple lever, the Delta Modern. For a sprayer from a major brand, the Delta Essa. For a classic two-handle look, the Kingston Brass. For two spray modes, the Cenosa. For solid brass, the KRAUS Oletto. For a low profile, the FORIOUS.
