A hot air rework station blows a controlled stream of heated air through a handpiece so small electronic parts can be lifted or reflowed on a circuit board. Buyers compare wattage, how the temperature is set and held, how many nozzles come in the box, and whether a soldering iron is bundled in.

The six stations below range from a palm-size 22 watt unit to a 1300 watt bench model, plus a 2-in-1 with a soldering iron. Specs come from each product’s listing page, and performance statements are the makers’ own. We have not used these stations ourselves.

As an Amazon Associate we earn from qualifying purchases. Links below are affiliate links, and they do not change the product information we give.

What to Look For

Feature Why it matters
Wattage Higher figures usually mean faster heating and more airflow
Presets Memories or channels store common temperature settings
Nozzles More shapes cover more chip sizes
2-in-1 A bundled iron saves buying a second station

Specs at a Glance

Station Power and size Display Notes
YIHUA 959D 700 W, 110 V; 12.01 x 8.35 x 7.48 in LED, F/C 3 memories, 3 nozzles, silicone mat, tweezers; range to 932 F
WEP 8858-V 22 W, 110 V; 3.5 x 4.6 x 2.4 in LCD Integrated nozzle holder; 3 extra nozzles; 2 tweezers; PID
ATTEN ST-862D 1000 W, 110 V LCD 100 to 480 C; 4 nozzles; 3 fast-access keys; silicone cable
YIHUA 8786D-I 740 W, 110 V; 5.8 x 3.9 x 5.3 in LED, dual Soldering iron combo; 10 tips, 4 nozzles, pump, IC extractor
SUGON 8620DX 1300 W, 110 V; 6.46 kg LED, 3 readouts 212 to 845 F; 4 memories; 6 nozzles; quick-change holder
AiXun H310D 1000 W 3.5 in IPS Brushless blower; built-in chip parameters; 3 modes

The 6 Best Hot Air Rework Stations

1. YIHUA 959D Hot Air Rework Station

A 700 watt, 110 volt station with an LED display, three memory channels, a detachable hot air gun, three nozzles, a silicone work mat and two tweezers. The listing gives a top temperature of 932 degrees F and an in-holder standby that cools the gun when it is put back. The control panel is brushed aluminum.

Suits: a full starter set with a mat. Strengths: three memories and included extras. Weaknesses: 700 watts is the lowest bench figure here. Skip it if you need a bundled iron.

View YIHUA 959D Digital Hot Air Rework Station on Amazon

2. WEP 8858-V Hot Air Rework Station Kit

A palm-size 22 watt unit, 3.5 by 4.6 by 2.4 inches, with an LCD, an integrated gun and nozzle holder, three extra nozzles, two tweezers and a PID program. Air volume is set with a knob. The detail table shows a temperature stability of 684 degrees F, which is not plausible for that field, so treat that line as an error.

Suits: a small desk. Strengths: a compact body and a knob for airflow. Weaknesses: a confusing stability entry. Skip it if you want high wattage.

View WEP 8858-V Hot Air Rework Station Kit on Amazon

3. ATTEN ST-862D Hot Air Soldering Station

A 1000 watt, 110 volt station with an LCD, a 100 to 480 degrees C range, a stated stability of plus or minus 1 degree C, three fast-access keys for temperature and airflow, a silicone-cable hot air gun and four nozzles. The listing shows the brand as DIYPHONE, not ATTEN, and the maker’s warranty text mentions 12 months.

Suits: a 1000 watt station with quick keys. Strengths: a soft silicone cable and four nozzles. Weaknesses: the brand name differs in the listing. Skip it if you want a mat and tweezers included.

View ATTEN ST-862D Hot Air Soldering Station on Amazon

4. YIHUA 8786D-I 2-in-1 Rework and Soldering Station

A 740 watt combination of hot air gun and soldering iron with dual LED displays and dual power switches. It includes ten soldering tips, four hot air nozzles, a desoldering pump, an IC extractor and a roll of 0.8 millimeter lead-free solder. Standards statements in the listing are the maker’s own.

Suits: one station for iron and hot air. Strengths: many accessories and two displays. Weaknesses: a larger set of parts to store. Skip it if you only need hot air.

View YIHUA 8786D-I 2-in-1 Rework and Soldering Station on Amazon

5. SUGON 8620DX Hot Air Rework Station

A 1300 watt, 110 volt station weighing 6.46 kilograms with an LED display that shows three temperatures, four memory stores, an automatic standby mode, calibration support, six nozzles and a quick-change nozzle holder. The range is 212 to 845 degrees F. The brand field reads HengTianMei.

Suits: the highest wattage in this group. Strengths: six nozzles and four memories. Weaknesses: heavy, and a different brand name in the detail table. Skip it if bench space is small.

View SUGON 8620DX Hot Air Rework Station on Amazon

6. AiXun H310D Smart Hot Air Rework Station

A 1000 watt station with a 3.5 inch IPS screen, a brushless blower, built-in chip desoldering parameters, segment and curve desoldering and a one-key switch between three modes. The listing has little else, so no nozzle count, size or voltage was available to us.

Suits: a screen-driven workflow. Strengths: built-in parameter library. Weaknesses: sparse listing data. Skip it if you want a clear parts list.

View AiXun H310D Smart Hot Air Rework Station on Amazon

Specs to Check Before Ordering

  • Voltage: the stations here list 110 volts, which matches US outlets.
  • Nozzles and extras included, such as a mat, tweezers or an iron.
  • Number of memories or channels.
  • Desk footprint and weight.

Mistakes to Avoid

  • Trusting one odd line in a detail table without checking the title.
  • Ignoring the maker’s instructions for the handpiece and holder.
  • Choosing a listing that does not state the nozzle count.
  • Assuming the brand in the title is the maker in the detail table.

Hot Air Rework Station FAQ

Do any include a soldering iron?

The YIHUA 8786D-I is the 2-in-1 here. The others are hot air only.

Which are compact?

The WEP 8858-V is palm-size at 3.5 by 4.6 by 2.4 inches.

The Short Version

For a starter set, the YIHUA 959D. For a palm-size unit, the WEP 8858-V. For quick-access keys, the ATTEN ST-862D. For an iron plus hot air, the YIHUA 8786D-I. For the highest wattage, the SUGON 8620DX. For a screen with chip parameters, the AiXun H310D.